Shop by Category

Shop by Brand

  • Front view of a 3 Button Keypad for a PILOT Joystick Module, Part number (P73903)

    • Keypad for 3 Key Remote Plus Joystick Controller with Single Profile

    Penny & Giles

    K232,050.57
    SKU:
    P73903
    Condition:
    New
    Shipping:
    Calculated at Checkout

    Out of stock

    Product Description

    JSM Keypad (9 Buttons) P81100 equivalent to P73903

    Replaces Keypad from Joystick D49671

    • Joystick keypad template to be used with the 3 Key Remote Plus joystick controller made by PG Drives Technology for power chair models manufactured by Pride Mobility
    • This remote plus keypad includes the following:
    • Battery condition meter
    • Horn key
    • Mode key
    • On/off key
    • Speed setting indicator

    Installation Instructions:
    1. Ensure the wheelchair power is turned off.
    2. Pull the gray collar back and disconnect the joystick cable from the joystick.
    3. Peel up and remove the existing, damaged keypad from the joystick face plate.
    4. Inspect the joystick contacts, face plate, and joystick housing for corrosion and/or damage.
    5. Using an alcohol prep pad, remove any adhesive from the joystick face plate.
    6. Ensure no adhesive remains around the rim of the joystick face plate.
    7. Gently remove any adhesive that may have collected in the lighting or contact cutouts of the joystick face plate.
    8. After cleaning, set the joystick aside for ten minutes to allow all alcohol to evaporate from the joystick face plate.
    9. Inspect once more for adhesive lumps or residue. If necessary, repeat steps 5-8 to clean the joystick face again if adhesive is present.
    10. Remove the backing from the new keypad.
    11. Align the bottom edge of the keypad with the bottom edge of the joystick face plate. Ensure the keypad is properly aligned with the joystick face plate before installing. The overlay is not repositionable.
    12. Working from the bottom up, gently press the keypad completely into the joystick face plate.
    13. Firmly press the keypad into the joystick face plate ensuring proper seal between the adhesive and joystick face plate.
    14. Ensure the keypad is completely seated into the joystick face plate and no air pockets or ripples are present around the edge of the keypad.
    15. Connect the joystick cable to the joystick.
    16. Turn on wheelchair power and test the joystick functions.
    17. If the joystick does not function properly, you may have a faulty joystick.

    PG Drives: P73903
    Pride Mobility: TECSERV1064

    California Proposition 65 Warning
     WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov

    Product Videos

    Custom Field

    Product Reviews

    Recommended