Frog Legs Ultra-Sport Caster Fork Polymers | Sold Individually

Overview

Product Description

Renew the suspension component inside your Frog Legs Ultra-Sport caster forks with these replacement polymers. The polymer dampener is part of the shock-absorbing fork assembly, making it a focused replacement when servicing the suspension.

The available polymer versions are matched to user-weight ranges, so the replacement can retain the appropriate weight-specific configuration. The installation information explains the pivot connection, dampener orientation, and fork pre-load involved in reassembly.

The dampener is installed coin-side up in the machined seat of the fork blocks. This orientation is part of the suspension reassembly described in the installation instructions.

Features

Replacement polymers for FROG LEGS Caster Forks
Please choose yours by user weight:
Weights Available:
Instructions For Installation of New Polymer Dampener to Frog Legs Caster Forks:
This is the pin that the upper and lower sections pivot on as seen in the Illustration below
Make sure that the polymer dampener is placed coin side up in the machined seat (a hole that does not go all the way through) in both blocks
Re-assemble the two sections (top and bottom) of the Frog Leg shock absorbing caster fork
NOTE: Your Frog Leg suspension forks are designed with a slight pre-load so the forks may have to be pressed against a solid surface in order to line up the holes

Specifications

MCP60: 80-160lbs
MCP61: 160-220lbs
MCP71: 220-260lbs
MCP80: 260+ lbs
Tools Required • 2- 5/32 inch (4 mm) Allen wrenches
Step 1
Using the 4 mm Allen wrenches, loosen and remove the pivot bolt
Step 2
Step 3
Tighten the pivot pin with the 4 mm Allen wrenches
If you are unable to line up the holes, Frog Legs offers an alignment bullet that can be purchased for $13.50
Option: MCP60: 80-160lbsType=Radio|Name=Add Alignment Bullet|Value=No Thanks!
Option: MCP60: 80-160lbsType=Radio|Name=Add Alignment Bullet|Value=Yes, add alignment Bullet (+13.50)
Option: MCP61: 160-220lbsType=Radio|Name=Add Alignment Bullet|Value=No Thanks!
Option: MCP61: 160-220lbsType=Radio|Name=Add Alignment Bullet|Value=Yes, add alignment Bullet (+13.50)
Option: MCP71: 220-260lbsType=Radio|Name=Add Alignment Bullet|Value=No Thanks!
Option: MCP71: 220-260lbsType=Radio|Name=Add Alignment Bullet|Value=Yes, add alignment Bullet (+13.50)
Option: MCP80: 260+ lbsType=Radio|Name=Add Alignment Bullet|Value=No Thanks!
Option: MCP80: 260+ lbsType=Radio|Name=Add Alignment Bullet|Value=Yes, add alignment Bullet (+13.50)
Quantity: Sold Individually

California Proposition 65 Warning

⚠️WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov